Industries
Flowtics for your industry. One platform. Your machines, your numbers.
Flowtics reads the PLC on almost any machine and shows the numbers your industry runs on: metres and reels, cycle times, packs, temperatures or lifts. Machine builders use it across every customer; factories across every line.
100+ paper and packaging machines onboarded at 29 sites, in India and abroad.
By industry
What Flowtics watches on machines like yours.
Pick your industry to see the machines, the readings and the alarms. Running today in paper & packaging; every other industry is set up the same way.
- Paper & packagingRunning today
Paper & packaging converting
Speed, reels, web breaks and every job change, so "your machine is slow" gets settled with data, not argued about.
Web speed182 m/minSee the page - Furnaces & boilers
Furnaces & boilers
Temperatures, pressures and burner hours, watched around the clock, with the right person told the moment a value leaves its band.
Zone 2 temp1,262 °CSee the page - Cranes
Cranes & material handling
Lifts, loads and running hours for every crane, so service is planned on how hard it has really worked.
Load now8.6 t of 10See the page - Clay & minerals
Clay & minerals processing
Throughput, motor loads and dryer temperatures across the plant, and the energy each tonne really costs.
Mill motor load72 %See the page - Plastics
Plastics & injection moulding
Cycle time drift, barrel temperatures and mould maintenance by real shot count.
Barrel zone 3218 °CSee the page - Pharma packaging
Pharma packaging machinery
Remote service for blister, cartoning and labelling lines, wherever they are installed.
Speed240 packs/minSee the page - Textile
Textile machinery
Long-running machines where every hour of downtime and every missed service costs output.
Spindle speed14,500 rpmSee the page - Food processing
Food processing machinery
Uptime, temperatures and cleaning cycles from processing and packing machines at every site.
Product temp4.1 °CSee the page
Connects to what you have
Reads the PLC that's already there.
11 protocols out of the box, and no integration project. Using something else, such as Mitsubishi or Omron? We can add it, and we test it on your machine during the free visit.
How the data gets from the machine to youDon't see your industry?
If your machine has a PLC, Flowtics can most likely read it. We check on your own machine during the free visit, and tell you plainly if it can't.
Book a free visit
See what your own machines can already tell you.
Half a day at your works and an honest written answer. No cost, no obligation.
What happens on the visit
- 01We come to your works
Half a day. We look at two or three of your machines and their PLCs.
- 02We check what Flowtics can read
Which readings, alarms and counters it can pick up, and what they would show you.
- 03You get a written report
With your own numbers. Then you decide: stop there, or start a pilot.
- No cost
- No obligation
- No technical preparation